Onnekas Multi Function Release Agent (MFR-25A)
Multi Function Release Agent (MFR-25A)
ONnekas Multi Function Release Agent is biodegradable & non toxic dispose-method;
-For non toxic disposal, simply add 100 parts of water to 1 part of MFR25A before disposing it into any watercourse. Once it is diluted using ration 100:1(MFR25A) is ecofriendly to all water system without harming any living organisms.
Key Functions :
1)Excellent lubrication & protection properties;
i) For die/mould release inmetal stamping, pressing, drawing, castings and extrusion.
ii)For machinery / conveyor chains.
iii)For tooling and mould cleaning & protection.
2)Excellent degreaser function.
i)No solvent needed to degrease parts before plating/coating.
Key Benefits :
i)Anti rust protection as long as coating remains on surface.
ii)Cost efficient due to water based concentrate can further dilute with water to suite usage. Dilution can be up to 1:3.
iii)Non- toxic-no heavy metal as certified by SGS.
iv)Biodegrable-dilution can be disposed anywhere; not harmful to living organism.
v)To prevent oxidation(anti-rust) for metal products as a coat.
Specification :
a)Appearance :Translucent and reddish to brown color.
b)Smell :Neutral
c)PH Value :9-12(alkaline base)
d)Specific Gravity :1.084 gram/cm3.
Recommendation using MFR25:
a)Dilution should start with lower ration of water and to be increased as test go along.
b)Water dilution ration guide : 1:1, 1:2, 1:3.
c)Metal stamping process: optimum dilution ration achieved when die is released smoothly with no color stains. For complex die less water to be added.
d)For very stubborn stain-less water to be added.
Different between Oil base lubricants compared with MFR25A
Note: Thirty party test report as per attached.
ONnekas Multi Function Release Agent is biodegradable & non toxic dispose-method;
-For non toxic disposal, simply add 100 parts of water to 1 part of MFR25A before disposing it into any watercourse. Once it is diluted using ration 100:1(MFR25A) is ecofriendly to all water system without harming any living organisms.
Key Functions :
1)Excellent lubrication & protection properties;
i) For die/mould release inmetal stamping, pressing, drawing, castings and extrusion.
ii)For machinery / conveyor chains.
iii)For tooling and mould cleaning & protection.
2)Excellent degreaser function.
i)No solvent needed to degrease parts before plating/coating.
Key Benefits :
i)Anti rust protection as long as coating remains on surface.
ii)Cost efficient due to water based concentrate can further dilute with water to suite usage. Dilution can be up to 1:3.
iii)Non- toxic-no heavy metal as certified by SGS.
iv)Biodegrable-dilution can be disposed anywhere; not harmful to living organism.
v)To prevent oxidation(anti-rust) for metal products as a coat.
Specification :
a)Appearance :Translucent and reddish to brown color.
b)Smell :Neutral
c)PH Value :9-12(alkaline base)
d)Specific Gravity :1.084 gram/cm3.
Recommendation using MFR25:
a)Dilution should start with lower ration of water and to be increased as test go along.
b)Water dilution ration guide : 1:1, 1:2, 1:3.
c)Metal stamping process: optimum dilution ration achieved when die is released smoothly with no color stains. For complex die less water to be added.
d)For very stubborn stain-less water to be added.
Different between Oil base lubricants compared with MFR25A
Oil Based Lubricants | MFR25A |
i)Captures dirt and substances easily. ii)Increases abrasion while stamping. iii)Reduces equipments lifespan. iv)Cannot dilute with water for cost efficiency. |
i)Easy to be washed off with just water. ii)Easy to wash off oil substances(if any) from mould. iii)Multi function feature : As a degreaser. iv)Come in concentrate form, offering longer consumption at low cost as can dilute with water. |
Note: Thirty party test report as per attached.